Four processing methods of titanium welded pipe!

Views : 722
Author : Roman
Update time : 2015-01-23 15:45:00

Zuudee BYD Titanium welded pipe processing generally has the following four methods:

1. Sheet-welded titanium tube: Compared with the multi-slit "shrimp" type, this titanium tube has fewer welds, but the more complicated the sheeting process, it requires a large number of molds, consumes more materials and processes, and has fewer welds. It will also affect the corrosion resistance, and the appearance is not ideal.

2. Multi-weld type (commonly known as "shrimp waist" type) titanium tube: its processing technology is complicated. Usually, the tube is cut into multi-section oblique openings, welded or rolled into multi-section unfolded material under the plate, and then rolled and welded. This method has a lot of leftover material and a large amount of weld seam. Because the welding seam will greatly reduce the corrosion resistance, it is easy to leak, and the appearance is not good. The inner surface is a folded surface, which increases the pipeline transmission resistance and increases the erosion corrosion of the back and reduces the service life.

3. Stamped titanium welded pipe: The appearance of this titanium pipe seems to be the same as that of the push-made titanium pipe, but the processing technology is to stamp the tube blank in the upper stamping die of the Song Dynasty. During the forming process, the back of the titanium pipe is pulled and forced The back is thinned, and the inner tube wall is thickened under pressure, resulting in uneven wall thickness or wrinkling, and the back of the titanium tube is subjected to erosion and corrosion during use. Due to the thin back wall, it is easy to wear early, which greatly reduces the overall life of the tube.

4. Cast titanium tube: Although it is a seamless titanium tube, the wall thickness (at least 5mm) cannot match the pipe wall thickness (2mm~4mm), which increases the transmission resistance, and the surface finish is poor. More importantly, there are internal A large number of defects such as pores caused by manufacturing seriously affect the corrosion resistance and service life.

The above types of titanium tubes are far from meeting the current requirements. The reason why the push-made titanium tubes are quickly accepted and welcomed by users is because the push-made titanium tubes have their own characteristics.

The processing of titanium welded pipe is to use the seamless titanium pipe as the billet, and the billet whose diameter is smaller than that of the finished product is used to push and extrude the billet on the special push extrusion machine. During the forming process, the pipe billet expands. Stress analysis shows that the stress in different parts is different, but under bidirectional compression, that is, under axial compression, radial compression and circumferential tension, the stress is always in tension.
https://www.youtube.com/watch?v=dH9Ijs7LJEU



Related News
Read More >>
The influence of forging process on the microstructure and mechanical properties of TA11 titanium rod The influence of forging process on the microstructure and mechanical properties of TA11 titanium rod
Sep .07.2023
This article explores the influence of forging processes on the microstructure and mechanical properties of TA11 titanium alloy rods and provides a comparative analysis of the microstructure, mechanical properties, and ultrasonic testing levels of three forging processes. It aims to provide theoretical references and a basis for the industrial production and process improvement of TA11 titanium alloy rods.
Chinese titanium market overview 2023.07 Chinese titanium market overview 2023.07
Aug .15.2023
This week, following the rapid consecutive decline in the price of sponge titanium, some titanium material prices have been adjusted downward, resulting in poor sales of titanium materials.
Titanium Subsea Thruster Titanium subsea propulsion system Titanium Subsea Thruster Titanium subsea propulsion system
Jun .01.2023
Titanium Subsea Thruster Titanium subsea propulsion system
SGS Conducts On-Site Inspection and Testing at Factory SGS Conducts On-Site Inspection and Testing at Factory
Jun .01.2023
Zuudee BYD Titanium's meticulous approach guarantees optimal performance of electronic components like sensors, chambers, and batteries even under high-pressure aquatic conditions.